How To Make Office Chair Arm Covers

Do you have an old office chair with ugly, outdated fabric on the arms? If so, don’t worry – you can easily make new covers for them! In this blog post, we will walk you through the steps necessary to make your own office chair arm covers. It’s a simple process that anyone can do!

Steps to Make Office Chair Arm Coverings

Step #1. Trace Your Armrest Flap Onto A Piece Of Fabric.

Start by flipping your office chair over so that you can access the underside of the armrest flaps. Use a pencil to trace around the outside edge of each flap onto a piece of fabric. If you’re using a patterned fabric, make sure that the design is going in the right direction before you cut it out!

Step #2. Cut Out The Fabric Pieces.

Once you have traced both armrest flaps, use a pair of scissors to cut them out. Make sure that you leave a little extra fabric around the edges so that you can sew it onto the chair later on.

Step #3. Sew The New Fabric Onto The Chair.

Now it’s time to sew the new fabric onto the chair! Start by threading a needle with some strong thread. Then, simply stitch the fabric onto the underside of the armrest flaps. Make sure that your stitches are evenly spaced and not too big, as you don’t want them to come undone easily.

How To Make Office Chair Arm Covers

How To Make An Un-stitched Office Chair Cover

If you don’t know how to sew, or if you don’t have a needle and thread handy, don’t worry – you can still make new office chair arm covers!

Step #1. Get All The Stuff

All you need is some fabric tape (like duct tape) and a pair of scissors.

Step #2. Cut The Fabric

Cut the fabric into two pieces, one for each armrest. Make sure that you leave enough fabric so that you can wrap it around the edges of the armrest and tape it down.

Step #3. Tape It Down

Now, use the fabric tape to secure the fabric to the underside of the armrest flaps. Make sure that the edges are well-sealed so that the fabric doesn’t come loose.

And that’s it! You now have new, stylish office chair arm covers – no sewing required!

How To Make A Slipcover For An Office Chair

If you want to take your office chair makeover one step further, you can create a slipcover for the entire chair! This is a great way to completely change the look of your chair, and it’s not as difficult as you might think.

Step #1. Get The Supplies

For this project, you will need a yard or two of fabric (depending on the size of your chair), a pair of scissors, and a stapler.

Step #2. Cut The Fabric

Cut the fabric into two pieces – one for the back of the chair, and one for the seat. Make sure to leave enough fabric so that you can wrap it around the edges and staple it down.

Step #3. Attach The Fabric

Start by stapling the fabric to the back of the chair. Make sure that the edges are well-secured so that the fabric doesn’t come loose. Then, do the same for the seat of the chair.

And that’s it! You now have a brand new slipcover for your office chair! This is a great way to change up the look of your space without spending a lot of money.

How To Make Arm Pads?

First, you’ll need to gather your supplies. For the base of your arm pads, you’ll need some sort of foam. You can find this at a craft store, or even sometimes at the dollar store. You’ll also need fabric to cover the foam, and Velcro to attach it. Optional supplies include ribbon or other trim, and paint or markers if you want to decorate your arm pads further.

Now that you have your supplies, it’s time to get started!

Step #.1 Cut your foam

Cut your foam into whatever shape you want your arm pads to be. If you’re not sure what size or shape to make them, you can always start with a basic oval or rectangle shape and go from there.

Step #.2 Cut your fabric

Cut your fabric slightly larger than your foam pieces. This will give you some wiggle room to work with when attaching the fabric to the foam.

Step #.3 Attach the fabric to the foam

There are a few different ways you can do this, but one of the easiest is to simply use glue. You can also sew the fabric to the foam if you prefer, or even use velcro strips.

Step #.4 Add trim (optional)

If you want, you can now add trim around the edges of your arm pads. This is completely optional but can give them a nice finished look.

Step #.5 Decorate (optional)

Now is also the time to decorate your arm pads, if you so desire. You can paint or draw on them, or even add gems or other embellishments. Let your creativity run wild!

FAQs

What are armchair covers called?

Antimacassar, The word “Macassar” has been used to describe a protective cover placed over the back of a chair or the cushions of a sofa, which was named after Macassar, an oil that was in widespread usage during the 19th century. However, some common terms that you might see include “armchair slipcovers” and “armchair protectors.”

Are antimacassars old-fashioned?

No, not at all! In fact, antimacassars are making a comeback in recent years as people are looking for ways to protect their furniture from stains and dirt. They are also a great way to change up the look of your space without spending a lot of money.

What is the best fabric for an antimacassar?

There is no “best” fabric, as it depends on your personal preferences. However, some popular choices include cotton, linen, and velvet.

How do I attach an antimacassar to my furniture?

There are a few different ways that you can attach an antimacassar to your furniture. The most common method is to sew it onto the underside of the armrest flaps. However, you can also use fabric tape or staples.

Can I machine wash my office chair arm covers?

This will depend on the fabric that you choose. Some fabrics, such as cotton, can be machine washed on a gentle cycle. However, other fabrics, such as velvet, should be dry cleaned.

If you have any other questions, feel free to leave them in the comments below!

We hope you found this tutorial helpful.

Happy crafting!

Popular Articles:

How To Adjust An Office Chair To Lean Back

Best Wide Office Chair

How To Keep Chair Mat From Sliding On Carpet

Robert Martin

Robert Martin

Hey, I'm Robert and I help manage this site. With several years in the financial space, I have spent a lot of time behind a computer sitting in an office chair. That led to many back and neck problems. That's where my search for finding the perfect office chair began. That research made me realize that others need help finding comfortable chairs, and that's why this blog was started!

Leave a Comment

Robert Martin

Robert Martin

Hey, I'm Robert and I help manage this site. With several years in the financial space, I have spent a lot of time behind a computer sitting in an office chair. That led to many back and neck problems. That's where my search for finding the perfect office chair began. That research made me realize that others need help finding comfortable chairs, and that's why this blog was started!

About ChairAdviser

ChairAdviser is an online resource for anyone wanting to understand all aspects of fixing or buying chairs. We have detailed chair guides, product reviews, and much more.

Recently Published Guides